Ictc-holdings-corporation 1240 User Manual

PROFESSIONAL CONTRACTOR PRODUCTS 2719 Lake City Way, Burnaby, BC, V5A 2Z6 ? P.O. Box 75, Custer WA 98240-0052 ? Phone: (604) 420-6543 Fax: (604) 4

HERO Operator’s Manual – Page 9 of 23 3.4 SURFACE PREPARATION Ensure that the surface you are spraying is clean, dry, and free from dust, oil, greas

HERO Operator’s Manual – Page 10 of 23 3.7 OPERATING THE SPRAY GUN Fill the cup as necessary (up to the shoulder maximum) with the properly diluted

HERO Operator’s Manual – Page 11 of 23 The direction of the spraying motion should be based on the spray pattern chosen: when spraying a horizontal pa

HERO Operator’s Manual – Page 12 of 23 Even Drip Figure 8

HERO Operator’s Manual – Page 13 of 23 Correct Application Technique Incorrect Application Technique Overlap strokes up to 50% to en

HERO Operator’s Manual – Page 14 of 23 CLEANING AND MAINTENANCE 4.1 BASIC CLEAN UP If you are taking a break or plan to spray the same material a

HERO Operator’s Manual – Page 15 of 23 4.3 COMPLETE DISASSEMBLY AND CLEANING OF SPRAY GUN Periodically, especially after spraying an adhesive, a cat

HERO Operator’s Manual – Page 16 of 23 enlarge the holes of these critical parts and affect the performance of your system when used. When re-assembl

HERO Operator’s Manual – Page 17 of 23 The Gland Seal is located behind the Gland Nut directly in front of the gun trigger and should be replaced per

HERO Operator’s Manual – Page 18 of 23 TROUBLE SHOOTING 5.1 BASIC TROUBLESHOOTING CHART Problem Probable Cause Solution(s) Turbine not working

HERO Operator’s Manual – Page 1 of 23 Thank you for choosing HERO HVLP (High-Volume Low-Pressure) sprayers for your spraying needs. At HERO Industrie

HERO Operator’s Manual – Page 19 of 23 5.1 BASIC TROUBLESHOOTING CHART (Continued) Problem Probable Cause Solution(s) Not Spraying At All or Incon

HERO Operator’s Manual – Page 20 of 23 5.2 TROUBLESHOOTING FINISH PROBLEMS Problem Probable Cause Solution(s) Runs or Sags A. Coating has been o

HERO Operator’s Manual – Page 21 of 23 OPTIONS AND ACCESSORIES 6.1 CUP-FED SYSTEMS Cup-Fed Systems include a turbine, air hose and cup-fed spray

HERO Operator’s Manual – Page 22 of 23 6.5 GUN EXTENSION WANDS, TOUCH-UP CUP KIT AND OTHER ACCESSORIES Gun Extension Wands For ease of use when spra

HERO Operator’s Manual – Page 23 of 23 WARRANTY INFORMATION LIMITED WARRANTY HERO Industries warrants to the original purchaser that the HERO equ

HERO Operator’s Manual – Page 2 of 23 CONTENTS Page 1. THE HERO HVLP ADVANTAGE 3 2. GETTING STARTED

HERO Operator’s Manual – Page 3 of 23 THE HERO HVLP ADVANTAGE HERO Turbine-Powered HVLP Sprayers are powered by an electric turbine which supplies

HERO Operator’s Manual – Page 4 of 23 GETTING STARTED 2.1 UNPACKING YOUR HERO SYSTEM Unpack your new HERO system from the box. Ensure that all i

HERO Operator’s Manual – Page 5 of 23 2.4 CONNECTING THE HOSE TO THE TURBINE With the power switch in the OFF position, uncoil the air hose and scre

HERO Operator’s Manual – Page 6 of 23 GENERAL OPERATING INSTRUCTIONS 3.1 OPERATING INSTRUCTIONS AND PAINTING TIPS For the specific Operating Inst

HERO Operator’s Manual – Page 7 of 23 Viscosity Chart Properties and thickness of coatings vary from one manufacturer to another. The following chart

HERO Operator’s Manual – Page 8 of 23 The size of the Air Cap is determined by the size of the center hole. Every Air Cap is stamped with number 1, 2